![[Banner Image]](images/hprdsrv.gif){kind=small}
Updated... Feb. 1st, 2008!
"FatDog Vintage Salvage"
Our very own line of premiere reproduction restoration Parts! Our line consists of 148 individual high quality parts for your vintage motorcycle. These parts have all been manufactured by a European aircraft industry supplier, from patterns taken from actual NOS parts. Great care has been taken to ensure exact fit and finish with absolutely no modification needed.
These parts are the labor of a renown European vintage HD restorer, NOT! a cheap mass production outfit. This is a combined effort to put high quality machined parts on the market to provide an affordable alternative for your vintage restoration!
Engine
Parts
| Photo | Part Number | Description | Price |
 |
95-17 | Valve guide inlet 'J' model | $18.00 |
 |
95-23 | Valve Guide inlet 25-29' 74", 28-29' L motors | $18.00 |
 |
166-32 | Valve Guide 45" 32-40' | $15.00 |
|
166-32S | Valve Guide 45" 32-40' +.0012 external OS | $15.00 |
 |
166-41 | Valve guide 45" 41'-up | $14.00 |
|
166-41S | Valve guide 45" 41'-up +.0012 OS external OS | $14.00 |
 |
221-40 | Tappet screw 45" | $4.75 |
 |
293-31 | Piston Pin bushing 45" 31'-35' | $9.00 |
 |
293-36 | Piston Pin bushing 45" | $6.00 |
 |
295-36 | Piston Pin bushing Big Twin | $6.00 |
 |
442-10 | Crankcase stud 1 5/8" | $5.00 |
 |
442-37 | Crankcase stud 4 1/2" | $7.00 |
 |
444-37 | Crankcase stud 5" | $6.00 |
 |
451-37 | Crankcase stud nut | $1.75 |
 |
453-11 | Drain Plug | $3.75 |
 |
591-36 | Scavenger oil pump stud | $5.00 |
 |
591-37 | Oil feed pump stud | $5.00 |
 |
591-41 | Special nut feed pump (short) | $4.00 |
 |
591-41A | Special nut feed pump (long) | $4.00 |
 |
620-30 | Bushing, idler gear 45" | $5.00 |
 |
660-37 | Bushing, gear cover 45" | $8.00 |
 |
660-37A | Bushing, gear cover 45" | $8.00 |
 |
660-37B | Bushing, gear cover 45" | $9.50 |
 |
660-37C | Bushing, gear cover 45" | $8.00 |
 |
660-37E | Bushing, gear cover 45" | $9.50 |
 |
661-37 | UL motor side cam bushing set $28.00 set | $8.00 ea. |
 |
661-37A-OS | Bushing, gear cover ext. .03mm oversize | $8.00 |
 |
661-37A-US | Bushing, gear cover int. .03mm oversize | $8.00 |
 |
679-37 | Scavenger oil pump billet aluminum body | $115.00 |
 |
CCR | 45" Connecting Rod Races | $59.00 Set |
 |
Seat-45 | Lead free 45" valve seats | $25.00 ea. |
Linkert
& Fuel parts
| Photo | Part Number | Description | Price |
 |
1118-30 | Manifold Inlet Packing Bushing UL | $10.00 |
|
1118-30A | Manifold Inlet Packing Bushing 45" | $7.50 |
 |
1152-11 | Needle valve adjusting screw | $9.50 |
 |
1234-24 | Air intake lever screw | $5.00 |
 |
1242-26/1243-24,40 | Throttle shafts 1", 1 1/4", 1 1/2" Linkert bodies | $17.00 ea. |
 |
1245-24 | Throttle shaft bushing | $3.75 |
 |
1251-33 | Plug, idle passage | $4.00 |
 |
1254-27 | High speed needle valve | $18.00 |
 |
1254-27S | High speed needle valve 10mm longer threads | $18.00 |
 |
1254-40MS | Needle (Military) | $18.00 |
 |
1258-33 | Main nozzle | $15.00 |
 |
1262-27 | Spring collar | $4.25 |
 |
1263-24 | Drill plug | $4.50 |
 |
1268-24 | Bowl lock nut nickel (early) | $10.00 |
 |
1268-29 | Bowl lock nut cad (late) | $9.50 |
 |
1273-33A | Needle & seat | $16.00 |
 |
1275-33 | Bowl cap | $7.00 |
 |
1293-27 | Needle Valve Lever Screw NEW! | $7.00 |
 |
1409-41M | Air cleaner connection screw | $5.50 |
 |
1413-36 | Air Cleaner Cover Screw | $3.75 |
 |
1413-41M | Air Cleaner connection clamps | $7.00 |
 |
3370-36 | Carburetor connection control | $6.50 |
 |
3607-41m | Fuel line | $19.00 |
 |
3636-40 | Gas shutoff valve top cap | $5.50 |
 |
27380-33 | Float (Brass) | $28.00 |
Transmission
& Shifter
| Photo | Part Number | Description | Price |
 |
2033-33s | 16 Tooth - 45" Transmission Sprocket w/ modern seal (45 sidecar) & early RL & WL trans | $75.00 |
 |
24003-55 | B.T. trans Sprocket Nut | $7.00 |
 |
34720-56 | B.T. Trans Vent Screw | $7.00 |
 |
34723-47 | B.T trans stud oversize | $8.50 |
 |
2205-31B | Gear shift ball (Bronze) | $19.75 |
 |
2205-31C | Gear shift ball (Chrome) | $29.75 |
 |
2206-37 | Shifter lever stud 45" | $9.50 |
 |
2215-41 | Clevis pin, shifter rod 45" | $5.50 |
 |
2225-36 | Bolt, shifter rod end 45" | $9.50 |
 |
2244-38A | Lock screw, shifter drum shaft | $5.00 |
 |
2251-36B | Shifting cam plunger cap screw | $6.50 |
 |
2296-33A | Spacing collar | $10.50 |
 |
2297-36E | Countershaft low gear bushing Big Twin | $8.00 |
 |
2297-41 | Bushing, 2nd gear 45" | $7.00 |
 |
2297-41A | Bushing, Low gear 45" | $7.00 |
 |
2304-36D | Countershaft 2nd gear bushing Big Twin | $8.00 |
 |
2314-41 | Countershaft bushing 45" | $15.50 |
 |
2314-39 | Countershaft Bushing 33-40 NEW! | $16.00 |
 |
2326-38 | Timing hole & Oil tank Drain plug | $5.00 |
 |
2326-38MA | Oil drain plug (w/magnet) | $15.00 |
 |
2346-33 | Sprocket cover stud 45" | $6.50 |
 |
2346-33a | Sprocket cover stud 45" | $6.50 |
 |
2346-33b | Sprocket cover stud 45" | $6.50 |
 |
2346-41 | Lock Pin, (shifter fork shaft) 45" | $3.75 |
 |
2410-36A | Bushing, clutch lever B.T. | $5.50 |
 |
2411-40 | Stud, clutch pedal spring | $6.50 |
 |
2413-38 | Stud, clutch cable/rod | $6.00 |
 |
2415-26A | Early 45" and Singles Clutch pedal Lock-tab | $7.50 Ea. |
 |
2427-38 | Lockpin 38-39' 45 Transmission (Hardened) NEW! | $19.50 |
 |
2428-41 | Zerk fitting, clutch Release lever | $7.00 |
 |
2446-29 | Clutch throw-out push rod | $18.00 |
|
2446-33 | Clutch throw-out push rod | $18.00 |
 |
2514-41 | Bushing, clutch gear 45" | $15.50 |
 |
2522-41 | Thrust bearing race 45" | $15.50 |
Spirals,
Footboards, Seat-T
| Photo | Part Number | Description | Price |
 |
2756-39A | Upper & Lower Head bearing cone | $17.00 |
 |
2783-30 | Steering dampner upper bakelite washer | $4.00 |
 |
2928-38 | Footboard support rod, front 45" | $35.00 |
 |
2954-14 | Footboard bolts | $7.00 ea. |
 |
3104-41 | Seat bar pivot (Short) | $15.00 |
 |
3110-37 | Seat-T inner and outer bushings | $19.75 |
 |
3113-29 | Seat post bushing 7/8" | $7.50 |
 |
3209-31 | Spacer (solo mounting) | $4.25 |
 |
3312-16 /Ni/C | Early Springer handlebar spirals, Available in Raw / Nickel or Chrome finish | $39.00 / $49.00 Ea. |
 |
3312-35/ C | Late Springer handlebar spirals, Available in Raw / or Chrome finish | $39.00 / $49.00 Ea. |
|
3312-35A-AC | Late spiral spark control (special* turns outward to advance spark) | $39.00 / $49.00 Ea. |
 |
3312 slv/N/C | Spiral replacement sleeves (all spirals) Raw/ Nickel/ or Chrome | $16.00Set/ $40.00 Set |
 |
3475-31 | Headlamp Bracket Bolt (I-beam Fork) | $7.00 |
 |
3743-23 | Rear Fender Brace Bolt | $6.00 |
Front
Brake
| Photo | Part Number | Description | Price |
 |
4001-35 | Spacer rear axle 45" | $4.50 |
 |
4005-35 | Axle sleeve nut 45" | $8.00 |
 |
4007-38 | Spacer 45" rear | $11.00 |
 |
4007-38C | Spacer, Chrome 45" rear | $22.50 |
 |
4069-26 | Clevis pin front brake connection 45" | $5.50 |
 |
4109-36 | Washer, side cover | $5.00 |
 |
4116-30 | Bushing, side cover | $8.00 |
 |
4116-36 | Bushing, side cover late | $8.00 |
 |
4117-30 | Stabilizer 45" front | $31.50 |
 |
4131-28 | Brake shackle bushing 45" | $8.50 |
 |
4145-28 | Inner brake cable | $6.00 |
 |
4180-36 | Front Spacer, Parkerized B.T. Front Axle | $15.00 |
 |
4180-36C | Front Spacer, Chrome B. T. Front Axle | $20.50 |
 |
HUB | 45" replacement front hub w/ Timken style bearings and rivets | $195.00 |
Special
kits, Electrical, Misc.
| Photo | Part Number | Description | Price |
 |
30011-58 | Generator end Bolt -58 | $5.00 |
 |
6910W | Dust Washer (drilled) Shock absorber | $5.00 |
 |
8011 | Brake stud nut and shock stud nut | $5.00 |
 |
8034 | Front lower tie rod nut (sidecar) | $5.00 |
 |
PNRK | Oil pump nipple repair kit w/ special tap and Allen wrench | $50.00 |
 |
1254-27S/40M | Linkert needle repair kit w/ special tap 1/4"-40 | $39.00 |
 |
RPNPL | Oil pump nipple replacement connection (cad) | $9.50 |
 |
RPNPLP | Same as above Parkerized | $10.50 |
 |
1529-30 | Washer, generator strap | $3.25 |
 |
1664-32 | Positive terminal screw | $6.00 |
 |
4857-36A | Reinforcement Plate Lower Horn Bracket | $4.00 |
 |
68188-39 | Two wire socket | $9.50 |
 |
000001 | Single wire socket | $9.50 |
 |
GE 1321 | 6V pre-focused spot lamp bulb | $9.50 |
 |
GE 1129 | 6v Single Filament | $5.00 |
 |
GE 1154 | 6V Tail lamp Repop Beehive | $5.00 |
 |
GE 1156 | 12V Single Filament | $5.00 |
 |
GE 1157 | 12V Tail lamp 2 Filament | $5.00 |
 |
GE 1158 | 6V Tail lamp Original Beehive | $5.00 |
 |
GE 44 | 6V dash bulb | $5.00 |
 |
GE 63 | 6V dash bulb | $5.00 |
 |
GE 64 | 6v dash bulb | $5.00 |
 |
GE 1034 | 12v Dual Filament | $5.00 |
 |
1/4"-40 | 1/4"-40 Special Linkert tap | $21.00 |
 |
5/16"-32 | 5/16"-32 Special Grease fitting tap | $25.00 |
____________________________________________
FatDog favorites
FatDog t-shirts
New Shirts!
"How
fat is your dog?" on the front and our Racing logo on the back! Sizes XXL Only ...$15.00
Kids Sizes Too!
Kids Sizes 6-8 Only ...$15.00
FatDog stickers!
Let your freak
flag fly! Only
$1.00
ea. OR...
FREE!!!
with order! Let the
Antique Motorcycle community know where you do your shopping,
FatDog style!
FatDog Caps
New!
Fitted Wool baseball caps! Limited sizes!
Black on Gray Only... $20.00
Fatdog 6 volt batteries
High quality 6 volt batteries for your scoot! complete with overflow and heavy duty terminals. (May require some modification to your battery Box) Special! $50.00!
FatDog Micamoly Gear lube Treatment
Add
to your transmission oil in a 1:10 ratio to reduce friction and
wear. Available in 3oz. bottles, and in large quantity up to 1
Gal. sizes. Developed by NASA to lower temperature in metal due
to friction. contains molybdenum (MoS2).
$5.00
for 3oz. bottle,
call or email for large quantity orders.
FatDog QX700 Moly Oil Blend (MoS2)
Add to Oil to seal
metals after Parkerizing. Also, add to crankcase to reduce
friction and wear. Available in 3oz. bottles and in large
quantity up to 1 Gal. sizes. Developed by NASA for the space
program! contains molybdenum (MoS2).
$5.00
for 3oz. bottles,
call or email for large quantity orders.
Superclean Waterless and Towel Less Hand cleaner
Perfect for the
shop without water! This stuff is amazing! Just use a spot about
the size of a dime, rub into hands, and watch as it dries up and
flakes to the ground taking grease and oil with it! No water or
towels needed!!
Sale! $5.00
for over 180 cleans!
Antique Parts
We Specialize in Antique Harley-Davidson 45c.i. Flathead parts, But also some Knucklehead and Panhead era parts, e-mail us at fatdog1903@yahoo.com for your vintage motorcycle parts needs. We carry NOS, Used and restored vintage parts. Our shop is littered with tons of parts, if we don't have it we'll get you to the people who do ...FOR FREE! just email us! We are always interested in purchasing old dealer inventories, estates, etc. just drop us a line and let us know!
Parkerizing
We are
specialists in properly Parkerizing your parts to match
the original finish they contained, then sealing each
individual part to prevent corrosion, using our own Moly
oil blend!
Although we
currently do not cadmium plate In-house, we can provide
aircraft quality cadmium plating in a variety of
different finishes, E-mail us at: fatdog1903@yahoo.com for a complete quote
on any of these services!
We can
properly prepare you parts for whatever medium you choose
to finish them with. From paint to Parkerizing we can
prep each piece for your needs!